ST I2C EEPROM M24512-DFCS6TP

Overview

The ST M24512-DFCS6TP is a high-performance, low-power, and cost-effective I²C EEPROM designed for applications requiring reliable data storage across a wide range of voltages. This device offers an impressive 512Kb density, making it ideal for storing configuration settings, calibration constants, and other critical system parameters that need to be retained even when power is removed.

Key Features

• Dual Interface Compatibility: Supports both Standard (100kHz) and Fast (400kHz) modes on the I²C bus, ensuring compatibility with various microcontrollers and SoCs.
• Wide Voltage Range Operation: Operates from 1.7V to 5.5V, enabling its use in systems powered by different voltage sources without additional components like level shifters or regulators.
• High Density Storage: With a capacity of 8K x 9 bits organized as 32 pages of ½ KB each, this memory chip provides ample space for complex application requirements while maintaining fast access times through page-based addressing.
• Packaged in Tiny Wafer Level Chip Scale Package (WLCSP5): The compact form factor makes integration seamless in space-constrained designs such as wearables, IoT devices, and portable electronics where every millimeter counts towards achieving miniaturization goals.
• Low Power Consumption: Designed with energy efficiency at its core, consuming minimal current during active read/write operations (<1mA typical), along with ultra-low standby currents down to just tens of nA, which significantly extends battery life in mobile and remote sensing applications.
• Data Retention Guarantee: Ensures stored information remains intact over extended periods, backed by a specified retention period exceeding ¼ century under normal operating conditions – more than sufficient for most long-term archival needs within consumer products and industrial equipment alike.

Applications

This versatile EEPROM finds extensive usage across multiple industries including but not limited to:

• Consumer Electronics: Smartphones, tablets, digital cameras, audio players, etc., benefit from using these chips due to their small size and robust performance characteristics suitable for mass production environments.
• Industrial Automation & Control Systems: In scenarios involving harsh environmental factors or extreme temperatures, having non-volatile memories capable of enduring tough conditions becomes crucial; thus, they’re often employed in programmable logic controllers (PLCs), motor drives, HVAC systems, among others.
• Automotive Sector: Given stringent reliability standards imposed upon automotive-grade parts, eeproms meeting AEC-Q100 qualification criteria find themselves utilized throughout vehicle electronics – infotainment dashboards, ADAS modules, ECU programming interfaces, keyless entry fobs, etc.
• IOT Devices: As Internet Of Things continues expanding rapidly, there’s growing demand for tiny yet powerful storage solutions able to handle frequent updates securely whilst minimizing overall solution footprint; hence, why many smart home appliances, health monitoring gadgets, asset trackers incorporate them into design architecture.

Product Specifications

• Part Number: M24512-DFCS6TP
• Manufacturer: STMicroelectronics
• Memory Type: Serial EEPROM
• Communication Protocol: Inter-Integrated Circuit (IIC/I2C)
• Storage Capacity: ⅛ MB / 512 Kbit
• Voltage Supply Requirements: 1.7V to 5.5V DC
• Operating Temperature Range: From -40°C up till +85°C standard grade, optional grades available supporting wider ranges (-40°C to +1–°C).
• Write Cycle Endurance Limit: Guaranteed minimum one million write cycles per byte before any potential degradation occurs.
• Read/Write Speeds: Up to 400 kHz clock frequency support allowing rapid transfers between host controller and peripheral.

Package Information

The M24512-DFCS6TP comes packaged in a highly integrated WLCSP5 package type, featuring dimensions of approximately ˜1.4mm × 1.4mm × 0.4mm, facilitating easy placement onto densely populated PCB layouts. It includes five terminals necessary for interfacing via two-wire serial communication interface alongside VCC/GND pins required for powering the component itself.

Conclusion

In summary, the ST M24512-DFCS6TP represents a compelling choice for designers seeking a dependable, flexible, and compact solution for integrating non-volatile memory capabilities into modern electronic projects. Its combination of advanced features, broad applicability, and adherence to industry-leading quality standards ensures longevity and competitiveness in today’s fast-evolving technological landscape. Whether you’re working on next-generation wearable tech, cutting-edge IIoT platforms, or state-of-the-art vehicular subsystems, considering this EEPROM could very well prove advantageous given all aspects discussed above.